DOT Inspection
Keeping a truck compliant with federal regulations is a safety question before it is a legal one. Our technicians run thorough DOT inspections, so your trucks meet every federal requirement and are safe to operate.
Read more
00 — Charlotte, NC
Seven service bays and a full team of diesel mechanics, working on heavy-duty trucks and commercial fleets across the Charlotte metro. Wheel alignment and suspension repair are the specialty, and everything from a DOT inspection to a driveline rebuild is on the list.
Live measurement
Shop
Uneven tire wear, or a truck pulling to one side? Alignment is the work this shop is known for. Very few shops in the area can put a tractor on a rack and measure the drive axles against the chassis centerline, and that measurement is the one that decides whether a combination rolls straight or drags sideways.
A bumpy ride is a symptom. Leaf springs, shocks, bushings and air suspension all fail gradually, and the suspension is what holds the tires on the road — which makes it a safety system before it is a comfort one.
Your trucks are how the business moves, so the repair has to be right the first time. We work on heavy-duty vehicles and commercial fleets, with alignment and suspension as the specialty and the tools and diagnostic equipment to back the rest of the list.
Quality service speaks for itself. With a focus on alignment, DOT inspections, suspension, tires and battery work, our diesel mechanics solve the complicated problems and get vehicles back on the road safely, across Charlotte, NC.
Call (704) 392-9938, Monday – Friday, 08:00–17:00. The shop is at 3815 Beasley Lane, Charlotte, NC 28206.
Inside
Seven bays, a heavy-duty alignment rack and the diagnostic equipment to go with them.
05 services
Scheduled work — the jobs that keep a truck out of the bay.
Keeping a truck compliant with federal regulations is a safety question before it is a legal one. Our technicians run thorough DOT inspections, so your trucks meet every federal requirement and are safe to operate.
Read more
Routine maintenance is what keeps a truck out of the repair bay. Our technicians in Charlotte, NC, run thorough inspections and scheduled services built around the demands your fleet actually puts on its equipment.
Read more
Eagle Span Corporation repairs and services Class 7 heavy equipment in Charlotte, NC. Our technicians work on the components that carry the load — hydraulics, suspension, brakes, wheels and axles.
Read more
Fleet repair and scheduled maintenance in Charlotte, NC, built to cut downtime, extend the service life of the equipment and hold performance steady across every unit rather than one at a time.
Read more
Battery inspection, testing and replacement for heavy-duty trucks and fleets, so the electrical system holds up under the loads a diesel start and a full accessory bank actually put on it.
Read more
06 repairs
Something has failed. These are the ones we fix most.
Alignment is the work this shop is known for: steer axle geometry, drive axle thrust angle and multi-axle alignment, measured on the equipment it takes to measure a truck.
Leaf springs, shocks, bushings and air suspension for heavy-duty trucks and fleets in Charlotte, NC. A suspension that is working is a safety system, not a comfort one.
Heavy-duty brake repair in Charlotte, NC, with air brake systems as the specialty — inspected, adjusted and repaired so the fleet stays safe and stays compliant.
Tire repair, replacement and balancing for heavy-duty trucks and fleets in Charlotte, NC — whether the problem arrived as a blowout or as a wear pattern nobody liked the look of.
Axle repair for heavy-duty trucks in Charlotte, NC — from a seal or a bearing through to a differential — turned around at the pace a fleet needs rather than the pace a queue allows.
Diagnostics that find the fault before anyone orders a part — dashboard warnings, electrical faults, emissions and driveability, measured rather than guessed at.
Said
Professional, knowledgeable and reasonable on pricing. I’ve had alignments and balancing done here as well as an oil change. As an owner operator, I find Reed and the staff some of the best around in Charlotte when it comes to maintaining a semi.
EagleSpan installed 6 new tires on my RV. They got the tires I wanted quickly, balanced and mounted the tires while I waited. They even installed new valve stems. Friendly people, great prices and speedy service earns them 5 stars. It’s also the only place in the Charlotte area that I know of that does alignments on big rigs.
I personally think this is the best most knowledgeable shop great tire guys great mechanics. Very safety conscious! When you leave here all questions are answered and you’ll feel better about your ride. So if your coming through Charlotte stop in and check them out.
FAQ
Heavy-duty trucks and commercial fleets, plus buses, trailers, RVs and Class 7 heavy equipment. The shop runs five scheduled services and nine repairs, and specializes in wheel alignment and suspension work.
Yes. Fleet repairs, preventative maintenance, federal DOT inspections and alignment are all part of the service list, scheduled around the way a yard actually runs rather than one truck at a time.
In addition to Charlotte, NC, many of our customers come from all over North Carolina, including Shelby, Salisbury, Statesville, Hickory, Concord, Kannapolis, Mooresville and Matthews.
Where
Next
Call the shop and talk to someone who works on these trucks, or send the details and we will come back to you with a time.